Please check your user manual under “Cleaning Your Array” or click here for step-by-step photo directions.
***** Do NOT use a toothbrush, wire brush, scour pads, Q-tips, or any other sort of instruments to clean your array as this will cause excessive destruction of the array. Just soak your array in the CLR mixture for about 10 minutes, rinse, dry and store with your power unit and foot tub. Use caution that you do not get the cables wet when soaking the array as this will cause the cables to begin to corrode (turn green).
You do NOT need to take your array apart to clean it. If you have questions about this after reading the User Manual and following the above link, email us at email@example.com or call us at 520-330-2686.